Kaplama Redresörleri Fiyatları | 3DY Arge Electronics - Rectifier, Forklift Battery Charger and Plating Rectifier
  • <p>2 Year Warranty</p>

    2 Year Warranty

  • <p><strong>Coating Rectifier </strong></p>

<p>Our rectifiers start from 500A and start from 1000A - 2000A - 3000A - 4000A - 5000A - 6000A - 8000A - 10000A - 12000A - 16000A...It is produced with air, water and oil cooling up to 20000A.</p>

    Coating Rectifier 

    Our rectifiers start from 500A and start from 1000A - 2000A - 3000A - 4000A - 5000A - 6000A - 8000A - 10000A - 12000A - 16000A...It is produced with air, water and oil cooling up to 20000A.

  • <p>100 % Domestic Production and National Capital</p>

    100 % Domestic Production and National Capital

Featured Features

• Standard Electroplating Process
• Aluminum or Copper Wrapped System according to request
• Chrome, Copper, Nickel, Zinc, Gold, Silver Plated
• Manual and Automatic Operation
• Microprocessor or PLC Based control system
• Thyristor/IGBT/Mosfet Controlled Systems
• Fully automatic operation
• Connection to the SCADA System
• Contact Warnings

  • Product Description
  • General Features
  • Usage Areas
  • Optional Features

Coating Rectifiers are fully automatic rectifiers produced with Thyristor Control and transformer, used to provide the necessary direct current such as coating, painting and anodization through electrolysis applied on metals and plastics. Another name is known as the Galvano Rectifier. 

 

Coating Rectifiers; Microprocessor and thyristor controlled, provide high accuracy and precise regulation and provide quality results in the process. 

 

Coating Rectifiers; They can be produced according to the desired volt and current or in accordance with the values brought by the process. All parameters from transformer manufacturing to electronic card design and power module creation are produced in our own facility. 

 

Coating Rectifiers are produced as 6 pulse and 12 pulse specially for the process.  One of the most important features of thyristor controlled (transformer) systems is Pulse Base current control. In coatings performed with Pulse Base management, the coating reaches to the lowest points thanks to this feature, no matter how indented or protruding the surfaces of the parts are.

 

Coating Rectifiers have an extremely simple operating program. Thanks to the remote control control unit, the operator can easily operate the device without going near the rectifier. Rectifiers are fully compatible with all automation systems. It can work both manually and in accordance with the automation feature.

Standard Electroplating Process 
ABS Plastic Coating
Chrome, Copper, Nickel, Zinc, Gold, Silver Plating
Manual and Automatic Operation
Microprocessor or PLC Based control system
Thyristor/IGBT/Mosfet Controlled Systems
Fully automatic operation
Connection to the SCADA System
Contact Warnings

Standard Electroplating Process 
ABS Plastic Coating
Facilities engaged in the production of Chrome, Copper, Nickel, Zinc, Gold, Silver Plating

Special Voltage and Current Values
SCADA Connection Interface
MODBUS RTU Communication
4-20mA Analog Outputs
0-10V Analog Outputs
Dry Contact Connections